 Competition Electronics Pocket Pro Ii
Description: You'll vastly improve your shooting speed, and ultimately your match scores,with this new generation of shot timer that's easily configured for the information you need to know when practicing your shooting. Main screen allows you to set-up the timer to display only the information you want to see. Review four shots at once with shot numbers, times, and splits with the high resolution digital LED screen. Keep track of your shot time with shot number, split and start delay type. You can also adjust shot sensitivity via the display menu and shot dead time to eliminate echoes while shooting. Onboard date/time display allows you to keep complete records as you chart your progress, Mfg: Competition Electronics SPECS: Plastic, blue or gray. Powered by one 9 volt battery, not included. Includes detailed instructions.
Store: Brownells Brand: Competition Electronics Price: USD 129.99 |
 Tactical Target Stands Llc Target Stands & Stakes
Description: Quickly adjusts from 15 1/2"" to 27 1/2"" (measured from center of lathe) Compact and simple to transport just 18"" x 17"" x 7"" Accommodates nominal 1"" x 2"" furring strips for anchoring targets Tighten furring securely in stand with set screws Use center set screw to anchor stand at desired width Four optional 7/16"" stakes keep stand from falling or blowing over Powder-coated heavy duty steel tubing Made in the USA 2x4 model accommodates standard 2x4s and is 19-1/2"" x 19-1/2"" x 7-1/4"" 2x4 model adjusts from 19-1/2"" to 29"" Mfg: Tactical Target Stands Llc SPECS: Powder-coated steel, 18"" (45.7cm) long, 17"" (43.2cm) wide, 7"" (17.8cm) tall.
Store: Brownells Brand: Tactical Target Stands Llc Price: USD 52.49 |
 10-8 Performance Llc S&W M&P U-Notch Rear Sight
Description: Cleanly machined from hardened, steel bar stock to better resist the wear and tear caused by daily holster carry. U-notch cut eliminates the distracting bottom corners of traditional sights for fast alignment with fiber optic, tritium dot, and gold bead front sights of factory height. 40 lpi serrations on the blade face reduce glare in sunny conditions. Upper corners are machine chamfered to prevent snagging on holster or clothing. Centrally located setscrew secures sight in factory dovetail. Includes wrench and instructions. May require minor fitting. S&W M&P .140"" U-Notch Rear Sight and S&W M&P .156"" Wide U-Notch Rear Sight available. Mfg: 10-8 Performance Llc SPECS: Steel, black, matte, manganese phosphate finish. Body - .895"" (2.3cm) long x .730"" (1.9cm) wide. S&W M&P .140"" U-Notch Rear Sight and S&W M&P .156"" Wide U-Notch Rear Sight. Fits all calibers, sizes of Smith & Wesson M&P pistols.
Store: Brownells Brand: 10-8 Performance Llc Price: USD 49.99 |
 10-8 Performance Llc 1911 National Match U-Notch Rear Sight
Description: National Match style rear sight combines modern features with ""retro"" looks. Fits the dovetail of GI-pattern 1911 pistols, including current-production Colts-no milling required. Extra-thick blade is tall enough to work with Colt .175"" high front sight or same-height aftermarket alternatives. Wide .140"" notch aids in easy, fast acquisition of front sight for precise targeting. Ledge on front of blade aids in one-hand slide racking. Mfg: 10-8 Performance Llc SPECS: Steel, matte black finish. .315"" high, with .140"" wide x .125"" high notch. Fits dovetail for GI-pattern 1911 pistols, including current-production Colts with .175"" high front sight.
Store: Brownells Brand: 10-8 Performance Llc Price: USD 33.99 |
 10-8 Performance Llc Armorer Tool
Description: Handy tool of extremely tough, non-marring glass-reinforced nylon is perfect for prying and pushing applications where a metal tool can damage the part or gun finish. Rigid chisel point on one end is useful for depressing springs and spring-loaded parts-even use to thread MOLLE straps through webbing-while the semi-flexible flat blade on the other end can get into tight spots or serve as a temporary shim. Great to have around during disassembly of semi-auto pistols like the 1911, Glock, or Smith & Wesson M&P or when working on service rifles like the AR-15/M16. Multiple ridges molded into the grasping area in the middle of the tool help prevent slippage when working wi Mfg: 10-8 Performance Llc SPECS: Glass reinforced nylon, Black or Flat Dark Earth, Approximately 5"" (12.7cm) long, 1/4"" (6.4mm) diameter.
Store: Brownells Brand: 10-8 Performance Llc Price: USD 7.95 |
 10-8 Performance Llc S&W M&P Magazine Base Plate
Description: Machined aluminum base pad for extended 14-round .45 ACP magazine offers a much lower profile than the factory pad. Eliminates the factory pad's extended ""toe"" that can snag on adjacent mags in a pouch, and is less bulky for better reload indexing. Side scallops give you a better grip during tactical reloads and help you pull a stuck magazine out of the magwell. One-piece, all-aluminum construction, so it won't break on impact with hard surfaces. Mfg: 10-8 Performance Llc SPECS: Aluminum, hardcoat anodized, matte black. Fits Smith & Wesson M&P 14-round .45 ACP magazines only.
Store: Brownells Brand: 10-8 Performance Llc Price: USD 36.99 |
 10-8 Performance Llc 1911 Recoil Spring Guide
Description: 1911 Spring Guide. Solid spring guide with beveled head to prevent damage to lower lugs of barrel. Head geometry and dimensions optimized for correct slide travel, even with common buffers installed. Heavily tumbled to remove sharp edges. Stainless steel, natural finish. Mfg: 10-8 Performance Llc Fits all Government Model sized 1911s and clones. Does not fit Commander or smaller size 1911s.
Store: Brownells Brand: 10-8 Performance Llc Price: USD 16.99 |
 10-8 Performance Llc S&W Shield U-Notch Rear Sight
Description: Rear sight for the S&W M&P Shield, 9/.40. These sights are precision CNC machined from prehardened 4140 bar stock, and are designed to withstand the rigors of hard duty use. The sight features a U notch for fast alignment with tritium dot or brass bead front sights. The rear face is serrated at 40 lpi to reduce glare in varied lighting conditions. The sight blade is thick enough to allow setting tritium vials as dots or bars if one so chooses, and is contoured and dehorned for comfortable handling and carry. Finished in black salt bath nitrocarburizing, equivalent to the factory finish on the slide, for superior hardness and corrosion resistance. Mfg: 10-8 Performance Llc The rear sight is compatible in height with the factory front sight (.160"" tall x .140"" wide) , and can also be used in conjunction with 10-8 Performance M&P front sights. Rear sight height is identical to the factory sight, and will not change point of impact.
Store: Brownells Brand: 10-8 Performance Llc Price: USD 48.75 |
 3 Bucc Inc. Ar-15/M16 Brass-Savr Brass Catcher
Description: Cotton-poly bag, supported by steel frame. Holds 70 rounds of .223 brass; easy-open bottom unloads fast. Separate models to fit carry handle and flattop AR-style rifles. Mfg: 3 Bucc Inc. SPECS: Cotton-poly cloth bag, steel frame, polymer mount, black, matte finish. 4 1/4"" (10.8cm) wide, 3 1/2"" (9cm) long, 7 1/4"" (18.4cm) deep.
Store: Brownells Brand: 3 Bucc Inc. Price: USD 59.99 |
