10-8 Performance Llc products
Browse 6 product entries preserved from this site’s saved catalogue. Listed prices are historical and do not confirm current availability.
 10-8 Performance Llc 1911 National Match U-Notch Rear SightNational Match style rear sight combines modern features with ""retro"" looks. Fits the dovetail of GI-pattern 1911 pistols, including current-production Colts-no milling required. Extra-thick blade is tall enough to work with Colt .175"" high front sight or same-height aftermarket alternatives. Wide .140"" notch aids in easy, fast acquisition of front sight for precise targeting. Ledge on front of blade aids in one-hand slide racking. Mfg: 10-8 Performance Llc SPECS: Steel, matte black finish. .315"" high, with .140"" wide x .125"" high notch. Fits dovetail for GI-pattern 1911 pistols, including current-production Colts with .175"" high front sight.
|
 10-8 Performance Llc 1911 Recoil Spring Guide1911 Spring Guide. Solid spring guide with beveled head to prevent damage to lower lugs of barrel. Head geometry and dimensions optimized for correct slide travel, even with common buffers installed. Heavily tumbled to remove sharp edges. Stainless steel, natural finish. Mfg: 10-8 Performance Llc Fits all Government Model sized 1911s and clones. Does not fit Commander or smaller size 1911s.
|
 10-8 Performance Llc Armorer ToolHandy tool of extremely tough, non-marring glass-reinforced nylon is perfect for prying and pushing applications where a metal tool can damage the part or gun finish. Rigid chisel point on one end is useful for depressing springs and spring-loaded parts-even use to thread MOLLE straps through webbing-while the semi-flexible flat blade on the other end can get into tight spots or serve as a temporary shim. Great to have around during disassembly of semi-auto pistols like the 1911, Glock, or Smith & Wesson M&P or when working on service rifles like the AR-15/M16. Multiple ridges molded into the grasping area in the middle of the tool help prevent slippage when working wi Mfg: 10-8 Performance Llc SPECS: Glass reinforced nylon, Black or Flat Dark Earth, Approximately 5"" (12.7cm) long, 1/4"" (6.4mm) diameter.
|
 10-8 Performance Llc S&W M&P Magazine Base PlateMachined aluminum base pad for extended 14-round .45 ACP magazine offers a much lower profile than the factory pad. Eliminates the factory pad's extended ""toe"" that can snag on adjacent mags in a pouch, and is less bulky for better reload indexing. Side scallops give you a better grip during tactical reloads and help you pull a stuck magazine out of the magwell. One-piece, all-aluminum construction, so it won't break on impact with hard surfaces. Mfg: 10-8 Performance Llc SPECS: Aluminum, hardcoat anodized, matte black. Fits Smith & Wesson M&P 14-round .45 ACP magazines only.
|
 10-8 Performance Llc S&W M&P U-Notch Rear SightCleanly machined from hardened, steel bar stock to better resist the wear and tear caused by daily holster carry. U-notch cut eliminates the distracting bottom corners of traditional sights for fast alignment with fiber optic, tritium dot, and gold bead front sights of factory height. 40 lpi serrations on the blade face reduce glare in sunny conditions. Upper corners are machine chamfered to prevent snagging on holster or clothing. Centrally located setscrew secures sight in factory dovetail. Includes wrench and instructions. May require minor fitting. S&W M&P .140"" U-Notch Rear Sight and S&W M&P .156"" Wide U-Notch Rear Sight available. Mfg: 10-8 Performance Llc SPECS: Steel, black, matte, manganese phosphate finish. Body - .895"" (2.3cm) long x .730"" (1.9cm) wide. S&W M&P .140"" U-Notch Rear Sight and S&W M&P .156"" Wide U-Notch Rear Sight. Fits all calibers, sizes of Smith & Wesson M&P pistols.
|
 10-8 Performance Llc S&W Shield U-Notch Rear SightRear sight for the S&W M&P Shield, 9/.40. These sights are precision CNC machined from prehardened 4140 bar stock, and are designed to withstand the rigors of hard duty use. The sight features a U notch for fast alignment with tritium dot or brass bead front sights. The rear face is serrated at 40 lpi to reduce glare in varied lighting conditions. The sight blade is thick enough to allow setting tritium vials as dots or bars if one so chooses, and is contoured and dehorned for comfortable handling and carry. Finished in black salt bath nitrocarburizing, equivalent to the factory finish on the slide, for superior hardness and corrosion resistance. Mfg: 10-8 Performance Llc The rear sight is compatible in height with the factory front sight (.160"" tall x .140"" wide) , and can also be used in conjunction with 10-8 Performance M&P front sights. Rear sight height is identical to the factory sight, and will not change point of impact.
|
