 Fulton Armory M14/M1a Picatinny Scope Mount
Description: One piece, steel mount provides a secure, stable scope base that won't shift between shots. Rock-solid, three-point mounting system attaches to the factory scope mount screw hole in the receiver and the charger guide dovetail, while the setscrew at the front uses the receiver ring as a stop to prevent forward movement. No drilling or tapping required; mounting hardware included. Machined from the same type of steel as the M14 receiver, so mount and receiver expand at the same rate as the gun heats up to help keep your optic zeroed during prolonged fire. Thirteen MIL-STD 1913 Picatinny cross-slots offer plenty of versatility in setting eye relief. Sight channel allows use of iron sights Mfg: Fulton Armory SPECS: 8620 steel, Parkerized, matte black finish. 5 1/2"" (14cm) long, 1 1/2"" (3.8cm) wide, 2"" (5.1cm) tall. 11.6 oz. (329g) weight. All mounting hardware included. Minor fitting required.
Store: Brownells Brand: Fulton Armory Price: USD 225.99 |
 Fulton Armory M1/M4/M1a Handguard Retaining Clip
Description: Steel retaining clip provides a snug, rattle-free grasp on the handguard. Replaces an old clip lost during maintenance, or one ""sprung"" by excessive removal and installation. Perfect for properly restoring a vintage rifle or completing a new project. Fits M1 Garand and M14-style rifles. Built to original USGI specifications for fit and finish. Mfg: Fulton Armory SPECS: Steel, Parkerized, matte black finish.
Store: Brownells Brand: Fulton Armory Price: USD 9.99 |
 Fulton Armory Springfield M14 Gas Piston
Description: Precision-machined, stainless steel piston is heat treated for hardness to maintain critical tolerances, resist wear, and help prevent rounding of the gas grooves for extended service life. Micro-polished surface reduces friction and resist carbon build-up, requiring less frequent cleaning. Mfg: Fulton Armory SPECS: 420 stainless steel, polished finish. 3.620"" (9.2cm) long x .497"" (1.3cm) piston diameter. 1.7 oz. (48.24g) wt.
Store: Brownells Brand: Fulton Armory Price: USD 39.99 |
 Fulton Armory M14 Gas Cylinder Shims
Description: Stainless steel gas cylinder shims align the barrel and gas cylinder ports when accuracy-tuning the rifle. Install one or more shims to get a tight fit and to eliminate front/rear cylinder play. Mfg: Fulton Armory SPECS: Stainless steel. Set contains one each of .005"", .010"", and .015"" thickness.
Store: Brownells Brand: Fulton Armory Price: USD 15.99 |
 Fulton Armory Ar-15 Clamshell Sight Covers
Description: These rigid plastic clamshell design sight covers completely protect the front and rear sights on AR type rifles. The covers open to go over the sight assemblies, then close like clamshell with an integral locking clip. Easy to install and remove. Mfg: Fulton Armory
Store: Brownells Brand: Fulton Armory Price: USD 16.95 |
 Fulton Armory M1 Garand Operating Rod Spring
Description: Brings back reliable extraction and feeding cycles to a Garand that has a worn-out or kinked spring. Made to original USGI specifications, and perfect for putting the ""spring"" back into an old rifle. Keep a spare on hand as a backup. Mfg: Fulton Armory SPECS: Tempered spring steel, natural finish.
Store: Brownells Brand: Fulton Armory Price: USD 8.49 |
 Fulton Armory M1 Garand Gas Cylinder Screw Plug
Description: Direct replacement for early-style solid screw plug can also replace later, valve-style plugs to prevent gas leaks that impair cycling and reliability. Maintains better gas cylinder pressure to cycle rifles converted to .308/7.62mm ammunition. Threads through the gas cylinder lock and into the gas cylinder to hold the cylinder assembly in place. Mfg: Fulton Armory SPECS: 1018 cold rolled steel, black oxide finish.
Store: Brownells Brand: Fulton Armory Price: USD 12.99 |
 Fulton Armory M1/M14/M1a Rear Sight Elevation Knob
Description: Steel rear sight elevation knob is drop-in ready to replace a worn out knob on your Garand. USGI-Spec, calibrated in yards, with one minute of elevation at 100 yards per click, just like the original. Can also be used to replace the elevation knob on an M14/M1A to change rear sight calibration from meters to yards. Mfg: Fulton Armory SPECS: Steel, Parkerized, matte black. Calibrated in yards. Fits M1 Garand and M14/M1A rifles.
Store: Brownells Brand: Fulton Armory Price: USD 49.99 |
 Fulton Armory M1 Garand Heavy-Duty Clip Latch Spring
Description: Heavy-duty clip latch spring replaces a worn or bent spring in M1 Garand rifles and helps prevent premature clip or ammo ejection. Ready to install. Mfg: Fulton Armory SPECS: Spring steel, natural finish.
Store: Brownells Brand: Fulton Armory Price: USD 5.99 |
